Galvanized Karfe Coil

  • DX51D Z80 Z180 Z610 Hot tsoma Galvanized Karfe Coil/Sheet/Trip don Ruwan iska.

    DX51D Z80 Z180 Z610 Hot tsoma Galvanized Karfe Coil/Sheet/Trip don Ruwan iska.

    galvanized coils, farantin karfe na bakin ciki yana nutsewa a cikin ruwan wanka na tutiya da aka narkar da shi don sanya saman farantin karfen bakin karfe a manne.Ana samar da shi ne ta hanyar ci gaba da aikin galvanizing, wato, takardar da aka naɗe da ƙarfe ana ci gaba da nutsar da shi a cikin tanki na galvanizing tare da zurfafan tutiya don yin galvanized karfe takardar;alloyed galvanized karfe takardar.Irin wannan farantin karfe kuma ana kera shi ta hanyar tsomawa mai zafi, amma nan da nan bayan an tashi daga tankin, sai a yi zafi zuwa kimanin 500 ° C don samar da fim ɗin gami na zinc da ƙarfe.Wannan galvanized nada yana da kyakkyawar mannewa da fenti da walƙiya.

  • DX51D S350GD S550GD 0.12-6mmHot tsoma Galvanized Karfe nada / strip / takardar Z275 don gini / purlin / rufi farashin Ma'aikata

    DX51D S350GD S550GD 0.12-6mmHot tsoma Galvanized Karfe nada / strip / takardar Z275 don gini / purlin / rufi farashin Ma'aikata

    • Kauri: 0.12 zuwa 6.0mm
    • Nisa: 5mm-1500mm
    • Nisa: A matsayin abokin ciniki ta bukata
    • Kauri na Zinc: 40 zuwa 275 gsm don Zinc Coating Steel Strip
    • Marufi: fitar da fakitin ruwan teku
    • Diamita na Coil na ciki: Dangane da buƙatu
  • Galvanized takardar birgima tare da embossed galvanized baƙin ƙarfe takardar galvanized karfe sheet Hot galvanized karfe lalata resistant galvanized takardar ba tare da embossed

    Galvanized takardar birgima tare da embossed galvanized baƙin ƙarfe takardar galvanized karfe sheet Hot galvanized karfe lalata resistant galvanized takardar ba tare da embossed

    Galvanized nada, farantin karfe na bakin ciki ana tsoma shi a cikin tankin tutiya da aka narkar da shi, ta yadda samansa ya manne da farantin karfe na bakin karfe.Ana samar da shi ne ta hanyar ci gaba da aikin galvanizing, wato, farantin karfen da aka yi birgima ana ci gaba da tsoma shi a cikin tankin plating tare da narkar da tutiya don yin farantin karfe mai galvanized.Alloyed galvanized karfe takardar.Hakanan ana yin wannan farantin karfe ta hanyar tsomawa mai zafi, amma nan da nan bayan tankin ya yi zafi zuwa kimanin 500 ° C, ta yadda zai samar da abin rufe fuska na zinc da ƙarfe.Wannan galvanized nada yana da kyau shafi mannewa da weldability.

  • SGCC GI GL Hot Dip Galvanized Karfe Coil Galvanized Sheet Metal Karfe 0.15-2.0mm Kauri

    SGCC GI GL Hot Dip Galvanized Karfe Coil Galvanized Sheet Metal Karfe 0.15-2.0mm Kauri

    Hot tsoma Galvanized Karfe Coil

    Ana samar da coils ɗin ƙarfe na galvanized ta hanyar gyaran ƙarfe na ƙarfe wanda ya haɗa da wucewar coils mai sanyi ta cikin tukunyar da ke ɗauke da narkakkar zinc.Wannan tsari yana tabbatar da adhesion na zinc zuwa saman takardar karfe.Tushen zinc yana ba da kyakkyawan juriya na lalata da tsawaita rayuwar sabis.

    Hot tsoma galvanized kayayyakin da ake amfani da ko'ina a gida kayan, kai, ganga masana'antu, rufi, tushe abu ga pre-Paint, ducting da sauran yi da alaka aikace-aikace.
  • Gi Gl SGCC SPCC CRC G550 Z275 Z100 Z60 Hot tsoma Sanyi Nadi 1000mm 1200mm 1219mm 1250mm 0.12 - 0.4mm Dx51d Dx52D Dx53D Zinc Mai Rufe Karfe Roll Galvanized Coil

    Gi Gl SGCC SPCC CRC G550 Z275 Z100 Z60 Hot tsoma Sanyi Nadi 1000mm 1200mm 1219mm 1250mm 0.12 - 0.4mm Dx51d Dx52D Dx53D Zinc Mai Rufe Karfe Roll Galvanized Coil

    Aikace-aikace: yin bututu, yankan zanen gado, yin kananan kayan aikin, yin corrugated zanen gado, yin ganga, yin fences, Kwantena farantin, yankan zanen gado, yin fences
    Nau'in: Karfe Coil
    Kauri: 0.12-6.0mm
    Length: A cikin nada, 1-6m ko a matsayin abokan ciniki' bukata
    Certificate: API, ce, RoHS, SNI, BIS, SASO, PVOC, SONCAP, SABS, sirm, tisi, KS, JIS, GS, ISO9001
    Daraja:SGCC/CGCC/DX51D+Z
    Saukewa: Z121-Z180
    Dabarar: Zafin Girgizar Gishiri, Mai Girgizawa Mai zafi
    Haƙuri: ± 1%
    Sabis na sarrafawa: walda, naushi, Yanke, lankwasawa, Yankewa
    Nau'in Spangle: Spangle na yau da kullun, mafi ƙarancin spangle
    Hardness: Mid Hard
    Lokacin Bayarwa: 7-10 kwanaki
    Sunan samfur: Galvalume Karfe Coil
    Tutiya mai rufi: 30-600g/m2
    Diamita na ciki: 508mm/610mm
  • 0.8mm sanyi birgima galvanized baƙin ƙarfe nada karfe galvalume nada tube gi galvanized karfe z275

    0.8mm sanyi birgima galvanized baƙin ƙarfe nada karfe galvalume nada tube gi galvanized karfe z275

    Galvanized karfe nada, Ƙarƙashin ƙarfe na bakin ciki yana nutsewa a cikin tanki na zinc mai narkewa, don haka saman farantin karfe na bakin ciki tare da Layer na zinc.Babban amfani da ci gaba da samar da tsari na galvanizing, wato, farantin karfe na mirgina yana ci gaba da nutsewa a cikin tanki mai narkewa na tutiya wanda aka yi da farantin karfe mai galvanized;Alloyed galvanized karfe takardar.Hakanan ana yin wannan farantin karfe ta hanyar tsomawa mai zafi, amma nan da nan bayan fitar da shi daga cikin tanki, sai a yi zafi zuwa kusan 500 ° C don samar da fim ɗin gami na zinc da ƙarfe.Wannan galvanized nada yana da kyau shafi tightness da weldability.

  • Galvanized Karfe Coil Factory Hot Dipped/Cold Rolled JIS ASTM DX51D SGCC

    Galvanized Karfe Coil Factory Hot Dipped/Cold Rolled JIS ASTM DX51D SGCC

    Standard: AiSi, ASTM, JIS
    Daraja: ASTM-A653;JIS G3302;EN10147; da dai sauransu
    Samfura Number:DX51D,Z275,da sauransu
    Nau'in: Karfe Coil, Cold / Hot Rolled Karfe Sheet
    Technique: Zafi Narke/Cikin Sanyi
    Jiyya na saman: galvanized
    Amfani na Musamman: Farantin Karfe Mai ƙarfi
    Nisa: 600-1250mm
    Length: Kamar yadda ake bukata
    Sabis na sarrafawa: Yanke
    Tushen Tutiya: 30-600g/m2
    Nauyin Coil: 3-5 Tons ko azaman abin buƙata
    ID na COIL: 508mm/610mm
    MOQ: 25 Mt (FCL 20ft ɗaya)
    Takaddun shaida: ISO, SGS, SAI
    Lokacin bayarwa: A cikin kwanaki 7-10
    misali: ASTMA36, JISG3302
  • Mafi kyawun masana'antun siyarwa tare da ƙarancin farashi da takaddar galvanized karfe nada mai inganci

    Mafi kyawun masana'antun siyarwa tare da ƙarancin farashi da takaddar galvanized karfe nada mai inganci

    Standard: AiSi, ASTM, bs, DIN, GB, JIS
    Darasi: Karfe nada, Dx51D, S220GD
    Lambar Samfura: Coil/Sheet/Plate/Trip
    Nau'in: Karfe Coil, Galvanized Karfe Sheet
    Fasaha: Cold Rolled
    Jiyya na saman: galvanized
    Aikace-aikace: yin bututu, yankan zanen gado, yin corrugated zanen gado
    Amfani na Musamman: Farantin Karfe Mai ƙarfi
    Nisa: 100mm-1500mm
    Tsawon: 10000-12000
    Haƙuri: ± 1%
    Sabis ɗin sarrafawa: Lankwasawa, walda, Yankewa, Yanke, naushi
    Lokacin Bayarwa: Kwanaki 7
  • SGCC DX51D+Z Karfe Coil Gi Galvanized Karfe Rolls High Quality Mota Sheet

    SGCC DX51D+Z Karfe Coil Gi Galvanized Karfe Rolls High Quality Mota Sheet

    Kauri:0.15mm-3mm

    Nisa:18mm-600mm

    Abubuwan da ke cikin Zinc:20-40 g

  • ASTM zafi tsoma factory farashin 0.53mm for g30 g60 g90 galvanized coils da sheet

    ASTM zafi tsoma factory farashin 0.53mm for g30 g60 g90 galvanized coils da sheet

    Galvanized nada, tsoma farantin karfe a cikin tanki na tutiya narke, don manne saman tutiyar takardar karfe.Ana samar da shi ne ta hanyar ci gaba da aikin galvanizing, wato, farantin karfe na birgima ana ci gaba da tsoma shi cikin ruwan wanka na tutiya mai narkewa don yin farantin karfe mai galvanized;Alloyed galvanized karfe farantin.Wannan farantin karfe kuma ana yin shi ne ta hanyar tsomawa mai zafi, amma nan da nan bayan ya fita daga cikin tsagi, sai a yi zafi da shi zuwa kusan 500 ℃ don ƙirƙirar alloy na zinc da baƙin ƙarfe.Wannan galvanized nada yana da kyau shafi tightness da weldability.

  • Galvanized karfe nada galvanized zafi tsoma galvanized farantin high tutiya Layer galvanized karfe takardar lebur 0.2 ~ 6.0MM

    Galvanized karfe nada galvanized zafi tsoma galvanized farantin high tutiya Layer galvanized karfe takardar lebur 0.2 ~ 6.0MM

    Galvanized Karfe Coil

    Ana nutsar da wani ɗan ƙaramin ƙarfe na bakin ciki a cikin tankin tutiya da aka narkar da shi don a manne saman saman da siraran zinc.Babban amfani da ci gaba da samar da tsari na galvanizing, wato, farantin ƙarfe na mirgina yana ci gaba da nutsar da shi a cikin tankin plating na tutiya don yin farantin karfe mai galvanized.

  • DX51D Galvanized Karfe Coil Tutiya mai rufi Gi Sheet Galvanized Karfe Rolls

    DX51D Galvanized Karfe Coil Tutiya mai rufi Gi Sheet Galvanized Karfe Rolls

    Kauri:0.35 zuwa 10 mm

    Nisa:600-2500 mm

    Abu:HC340LAD+Z HC340LAD+Z HC220BD+Z DX54D-DX56D+Z

    HC220BD+Z DX54D-DX56D+Z DX51D+Z-MD DX51D+Z-HR GB/T2518-2008 EN 10327-2004 DX52D-DX53D+Z

    SGH340 SGC340 SGH440 JIS G3302-2010 Q/HG007-2016

    GB/T2518-2008 S550GD S350GD+Z+Z

    Grid na Jiha DX51D+ Zq/HG007-2016 GB/T2518-2008

12Na gaba >>> Shafi na 1/2